Thursday, May 31, 2012

Teaching Enhanced with Simulations in Simulink


Teaching Enhanced with Simulations in Simulink


Introduction – Teaching in University
In the engineering sphere, courses are usually commenced off with introduction of formulae or equations that describe underlying principles of various theories. These equations are then transformed from printed symbols on the blackboard to actual observed occurrences in real world systems (through experiments conducted in laboratory classes). This is the teaching method that has been practised for centuries and is widely believed to be the best method by lecturers.
However, this current teaching approach can still be improved. In reality, most students find it difficult to relate the theories they learnt to the real world systems they actually see.
Figure 1 – Missing Link between Theories learnt in lectures and the Real World Applications.
This is because there are many limitations to what can be achieved in the laboratory (e.g. safety, cost). Besides, experiments are not always easy to grasp the first time doing it nor it is as straightforward as it may thought to be. An intermediate stage between these two phases is needed to ease and speed up the transition. This intermediate stage will be discussed in the next section but before that let’s see how teaching has evolved over the century and why this intermediate phase is important in this modern world.
The Evolution of Teaching
Everything evolves over time, and so is teaching. Looking back, chalkboard art (Figure on the right) was the popular method used to teach a couple of decades ago. However, there are disadvantages with this method.
  • The teaching and learning process is slower.
    Lecturers have to write the notes on the blackboard and students have to copy them down. This ’2 times’ writing process impedes capability for speedier transfer of knowledge.
  • Every diagram/graph/chart drawn is a sketch, not accurate, and static.
    Though lecturers may be able to draw diagrams accurately but students often misinterpret the sketches and then get baffled with their notes later on. In addition, diagrams are static and inhibit students’ capability to learn faster through visualisations.
  • Explaining effects of a parameter change (in an equation) could be awful.
    Frequently, lecturers want to explain the significance of parameters in an equation to illustrate the effects they have on the real system. To achieve this, lecturers have to erase and redraw the diagram all over again, which is time wasting and painful.
As time goes by, technology advances and then comes the projector art. With the overhead projector, lecturers improved their teaching considerably. Below is the list of advantages (and disadvantages) of projector art.
  • Cleaner
    Chalks are replaced with ink pens and transparencies. No more dry fingers, dusters and asthma.
  • Eliminates inaccuracies
    Projector technology enables lecturers to display photocopied transparencies during lectures. This enhances visual learning through display of accurate drawings/graphs/diagrams and students will be less likely to copy down incorrect diagrams.
  • Speedier learning

    With photocopied transparencies, lecturers now reduce time wastage by eliminating the need to write lots of notes or draw diagrams on the blackboard. The transparencies can also be photocopied and be distributed to the students as notes.
  • (Disadvantage) Diagrams are still static

    Though accurate, the diagrams/graphs/charts are still static (i.e. no animation or simulation). This is like comparing between staring at an image and watching a movie. We tend to experience and learn more in a movie (or a series of moving images).
Next in the evolution timeline is through the usage of simulations. Numerous researches have been conducted and visual learning has been found to be the easiest and quickest way to learn new information. Simulations are a very good method to enhance visual learning.
Simulation in Modern Teaching
Simulation plays a critical role in modern teaching. In this present era, technology advances at an unimaginable rate (compared to that half a century ago) and is constantly keeping us on our toes (in anticipation of ‘what’s new’ down the road). The amount of information is rising, the number of professionals is increasing and new researches are published every day. However, the number of years of education in a typical University degree remains the same (4 years). This means there is higher density of information that modern students need to absorb. This highlights an important trend that educators need to take note in order to keep up with intellect’s ever-expanding sphere. Let’s see an example of a conveyor mechanism.
Conveyor Mechanism (Figure on the right)
With chalkboard art, lecturers are limited to drawing sketches and writing equations on the blackboard. Describing kinematics or the actual operation of this mechanism takes a great deal of effort.
Projectors enhance the teaching process with the ability to display an accurate representation of the mechanism immediately and how various parts are connected together. (For e.g., just by photocopying the above model onto a transparency)
However, simulation enhances the teaching process considerably. Let’s take a look at the figures below.
Conveyor Mechanism in Simulink
The figures above illustrate a virtual conveyor mechanism built in the Simulink environment. Here are some of the advantages of this model.
  • With Simulink’s diverse features and capabilities, there is so much that can be achieved. A simple example shown here are the responses of the system (torque, linear and angular position) which are plotted as the simulation runs.
  • Students are able to directly view how the conveyor mechanism operates when (for e.g.) a certain amount of torque is applied to the lower link. These allow them to visualize the system and relate it directly to the equations they learnt in lectures.
  • Virtual model is safe, cheap and its parameters can be changed over and over again without any worries of unfortunate incidents. Students then can test and see for themselves (and learn) how the theories they learnt in lectures affect the behaviour of a system. Upon studying the system, then they can move on to the laboratory classes and relate what they discover in the simulation environment to the actual occurrences of real world systems.
  • (Though no simulations here) Simulations catch attention and build interests to those who see it. This increases students’ passion for the subject they studied and hence be able to always relate their studies to what they see.
  • Simulink allows lecturers to design models up to high level of complexity. Therefore, there’s almost no end to what can be designed in the Simulink environment and be shared during lectures. Simulink also enables students to link up with systems from other domains (e.g. electrical to mechanical to thermal) to test out the integration feasibility between systems.
Conclusion
In conclusion, as the phrase goes “Picture speaks a thousand words”, so is simulation in the teaching environment. With simulation, students are able to learn much more (through visual learning), as well as to understand the theories taught in lectures at a quicker rate. They’ll also be able to relate what was taught to the real engineering systems and hence increase their passion on the subject they’re learning.
End of the Article:
For more product information on Simulink, please refer to http://www.mathworks.com/products/simulink/?s_cid=global_nav
Article by James Ang, Application Engineer

Simulink for field-programmable gate array (FPGA) automation with Xilinx – Simple & Easy


MATLAB is renowned for algorithm exploration and development. On the other hand, Simulink is capable of performing time-based multi-domain system-level design, modelling, analysis, simulation in the graphical environment. Besides, Simulink also streamlines the development of embedded systems like FPGA and provides hardware verification or co-simulation of the user design, modelling and algorithm. With hardware co-simulation and deployment, we can obtain early customer feedback and confirmation.
Therefore, Mathworks has introduced EDA Simulator Link 3.3 with the ability of FPGA co-simulation via any of several Xilinx development boards in the Simulink environment. With EDA Simulator Link 3.3, we can:
  • Develop and implement our designs on FPGAs in days or weeks rather than in months.
  • Explore implementation and design trade-offs in hardware environment.
  • Verify HDL system level design.
Generally, the hardware co-simulation with Xilinx FPGA board is known as FPGA-in-the-loop (FIL). EDA Simulator Link supports FIL simulation on the devices shown in Table 1.
Device Family
Board
Spartan-6Spartan-6 SP605
Spartan-6 SP601
XUP Atlys Spartan-6
Virtex-6Virtex-6 ML605
Virtex-5Virtex-5 ML505
Virtex-5 ML506
Virtex-5 ML507
Virtex-5 XUPV5–LX110T
Virtex-4Virtex-4 ML401
Virtex-4 ML402
Virtex-4 ML403
Table 1: Support of Xilinx board in FIL simulation
FIL provides the capability to test our designs in real hardware for any existing HDL code (VHDL, Verilog). The HDL code can be either manually written or generated from Simulink HDL coder. FIL then performs the following process:
  • Generates a Simulink FIL block that represents the HDL code
  • Creates a programming file and loads the design onto an FPGA with JTAG connection
  • Receive and transmits data from Simulink to the FPGA via Ethernet connection
  • Verify the design in a real environment
The FIL process provides synthesis, logical mapping, PAR (place-and-route), programming file generation, and communications channel. All these capabilities are specifically designed for a particular Xilinx board.
Figure 1 demonstrates how EDA Simulator Link 3.3 communicates between Simulink and the FPGA board using FIL simulation.

Figure 1: FIL Simulation with Xilinx FPGA Board
For the purpose of better understanding of this newly introduced FIL, let’s explore the way on how the FIL works. From Figure 1, it is shown that the FIL co-simulation block (hdlduc) is the interface between the Simulink model and the executable application running on the Xilinx FPGA board. The hdlduc FIL Simulink block is generated from the Simulink block, denoted as “Filter” highlighted with blue colour.
During FIL co-simulation, Simulink simulates the design model and exports the input data to the FPGA platform via Xilinx ISE Design Suite interface. Then, the FPGA platform receives input data from the Simulink design model through Ethernet connection. After that, the Xilinx FPGA will execute and process the input data based on the algorithm of the “Filter” Simulink block. Next, the FPGA will send the data back to Simulink via Ethernet connection.
In summary, FIL co-simulation combines conventional simulation with Xilinx FPGA. It provides an alternative debugging environment so that it is possible to detect, isolate, identify and resolve bugs in the early stages.
At this point of the article, you should already understand the basic notion of FPGA-in-the-loop. To find out more on the functionalities, capabilities as well as the underlying attributes of FPGA-in-the-loop, you can visit the following site:
Article by Dr. Chong Jin Hui, Senior Application Engineer

Matlab codes for active contour without edges (levelset based)

Somebody implemented the algorithm of active contour without edges (based Chan and Vese's paper) in Matlab athttp://www.postulate.org/segmentation.php. It runs well, but is slow.

Another Matlab implementation is by Dr. Chunming Li (who is a collaborator of Dr. Kao) and is available athttp://www.engr.uconn.edu/~cmli/code/. It is much faster and also has the implementation for multiple levelset functions.

MATLAB Codes for Image Processing


As I had promised, I am going to upload the files to various codes related to image processing in MATLAB. Starting from the simpler, I will move on to more complex codes. I have commented wherever the need be, in order to make the code understandable to a laymen. Suggestions are always welcome. I will keep on posting the links of file-hosting sites where I have uploaded my code. A single click will enable you to download the code. The codes have been written in MS Word. All you need to do is to copy-paste the code in the MATLAB editor, unless otherwise specified.

DOWNLOAD BELOW CODES 

Real-time face detection and tracking using OpenCV


Real-time face detection and tracking using OpenCV

Before some of you guys get paranoid after reading OpenCV and start googling for it, let me give a bird's eye view of what OpenCV actually is:

Developed by the researchers at Intel, OpenCV is an open source library of functions dedicated to image processing. OpenCV (Computer Vision) - as the name suggests, is primarily focused on image processing aspects. It has a very rich (and equally complex) library of functions - thanks to the fact that it is an open-source tool. Learning all of these functions is difficult, and I rather approached it in a different way - learn a function as and when I need them. 

Okay, so I tried and developed some of the basic programs like displaying an image or a video feed in a window, real-time video feed from a webcam, accessing individual frames from a video and filtering them and so on. I did that to get acquainted with the tool. Let me tell you that those programs are not as tough as they sound - just a few lines of code and that would serve the purpose. Some of you might even think of it as waste of time, but trust me - the work will pay its dividends. Once I was comfortable with using the basic functionalities, I developed a slightly complicated program - 'Real time face detection and tracking'.

OpenCV can be used with Windows, Unix, MAC and can be augmented with a variety of compilers - VS C/C++, Eclipse and many more. I preferred to use it with Windows, VS 2008 and .NET framework. If you're familiar with OpenCV, you will know that you can even use a wrapper instead of the .NET framework, but since it was my first project, I rather decided to stay away from it. The general logical flow of the program follows. I'll try and upload the video of the same as soon as possible so that you can have an idea of what exactly does the stuff do. The code is available upon request (prefer to contact me on varunshah444[at]gmail[dot]com). I welcome queries/suggestions and related comments from everyone.

Logical flow:

1. Start the webcam, and gain access to the live feed from it
2. Access the individual frames (this is where your hardwork pays off!!)
3. Load a cascade classifier for front of the face, and do template matching
4. You will now have the location of the face(s) in your video
5. Draw a rectangle (or whatever god damn shape you prefer) around the detected object (face in our case)

For those who are familiar, I have used the classifier cascade method and not the 'training-images' one, because of few reasons:

1. The latter takes hell lot of time to generate the .xml file. Typically, 3-4 days of continuous processing
2. It's tad complex compared to the classifier cascade method
3. For a beginner, it's better to use the former method

The moment it compiled and started working, I was on Cloud9, pheww!!! It is a wonderful feeling when your hardwork ultimately pays off. As I always say - Work hard, party harder! Happy coding!!!

LET'S CODE MORE WITH TABLING THE OUTPUTS



Recall that from the first post, we have already:
  • Algorithm for any program should consists of three main sections - input, computation and output
  • Basic syntax for mathematical operation
  • Solving the assignment given
For this post, we will discuss on more coding.
P/S: Before I proceed, I would like to make some correction. From Figure 1.4, the semicolon (;) at the end of the last code line is preferably dropped to result in automation of output display when running the program.

Here is the new assignment given this week:

QUESTION: 
Write a Matlab program, using a script M-file, that calculates the velocity and acceleration of an aircraft at time 0 to 120 seconds with increments of 10 seconds. Display the results in a table of time, velocity and acceleration.

The following are the equations to estimate the velocity and the acceleration of the aircraft:
velocity=0.00001*time.^3−0.00488*time.^2+0.75795*time+181.3566
acceleration=3−0.000062velocity.^2

NOTE: I will leave it to you to solve the algorithm and the flowchart before doing the Matlab code.

Here's how to do your simple Matlab code:

1. It is advised that you start your fresh code with the keyword clear as has been explained in the first post (Figure 2.1).

2. You are now required to define the input as t (time). #Suggested code can be obtained in the Figure 2.1. You can use t = input ('Insert range of time in s: '); as well although that would require you to key in

3. You are now required to compute the variable V (velocity) and A (acceleration) using the formula given in the question and with the variables t that you have defined as the input in step (2) (Figure 2.1). The code is as follows:

V = 0.00001*t.^3 - 0.00488*t.^2 + 0.75795*t + 181.3566;
A = 3 - 0.000062*V.^2;

Figure 2.1

TIPS: For computation of power, please make sure that you inserted .^ instead of ^ only. I am not sure what is the explanation but it seems that the latter won't work when running the program.

4. You need to define your output (or display or print). The question requires you to compute Velocity and Acceleration as the result, then display them in the table form (Figure 2.2). Therefore, the code is as follows:

table = [t' V' A'];

5. To display the output in the form of table with headings on top of it, use the following additional codes (Figure 2.2):

disp (' Time      Velocity    Acceleration '); 
disp (table);

TIPS: The difference between step (4) and the additional step (5) is that step (4) results in tabulation of matrix that does not have the headings 'time', 'velocity' and 'acceleration' above the data when running the code.

Figure 2.2

6. Save your code and run it on the command window.

GOOD LUCK IN TRYING. Thank you for staying till the end of this article. Any improvements on the Matlab code can be submitted to the comment box below.


Article Source: bernard-greentea.blog

CODING A SIMPLE MATLAB CODE


Greetings and welcome to Bern’s section on the basic computation programming for engineers. In this first article that I have wrote for this special section on my blog, I would like to talk about constructing a simple computer language code using the Matlab for a common mathematical question. If you are my JKKP classmates, I am sure that you have the question for the assignment given by Dr Meor with you. If you are not, here is the question stipulated:

QUESTION: 
The area of a triangle having side lengths a, b and c is:
Area = √(s(s-a)(s-b)(s-c)) - where; s = (a+b+c)/2


Write a computer code (Matlab) to prompt user for the three sides of a triangle and then compute and print the area using the relationship above. You are expected to submit the algorithm, flowchart and the computer (Matlab) code.

NOTE: I will leave it to you to solve the algorithm and the flowchart.


Here's how to do your simple Matlab code:

1. Open your Matlab software. Now, you are at the command window.

2. Type edit and enter. Now you have open the editor window.

Please note that the editor is the place you do the coding. The command window can be used to do so too, as well as served as a place for checking and experimenting. Analyze the question and do the proper algorithm before you start the coding. The algorithm should have the following:
  • Input - you are required to name the input A, B and C; as well as to define the S (I'm using capital letter here)
  • Computation - you are required to compute AREA
  • Output - you are required to determine the output, in this case is the AREA
3. First step; it is advised that you start your fresh code with the keyword clear (Figure 1.1).
TIPS: 'Clear' erases any existing variables and helps to reduce risk of errors that may arise.

4. Second step; you are now required to define the inputs. We have earlier, determined that we need to put three different inputs of a, b and c to initiate computation. Suggested codes are displayed in Figure 1.1 below:

Figure 1.1

The codes are divided into two distinguished commands here as in black and purple-colored text. The black-colored code defines the variables A, B and C or the side lengths of the triangle as the input. The purple-colored code, meanwhile is a description of the input variables that you can fill in when you run the code on the command window (we will get back to this later).

5. Third step; you will need to define and compute the variable S using the formula given in the question and with the variables A, B and C that you have defined as the input in step (4). The code is as follows:

S = (A+B+C)/2;

TIPS: Semi-colon (;) is inserted at the end of each code line (if necessary only) to stop the program from auto-computing that particular formula on that line. It may not be critical in the editor window but it will be in the command window.

6. Fourth step; you are now required to insert the computation code to compute area of the triangle based on the variables A, B, C and S. Use variable AREA to represent area. The code is as follows:

AREA = sqrt (S*(S-A)*(S-B)*(S-C));

TIPS: Figure 1.2 below shows the syntax for some basic mathematical operations:

Figure 1.2

7. The fifth step will be that you need to define your output (or display or print). The question requires you to compute AREA as the result. Therefore, the code is as follows:

Output = AREA;

8. There is no exact syntax code for stop here. Leaving it as it is should be subtle. Please note that adding stop or endat the end of the whole coding may causes error. End syntax should only used to close a loop or repetitive conditioning. After doing steps (1) to (7), your code should look something like the one displayed in Figure 1.3.

Figure 1.3

9. Save this file to your proper directory on the computer. For mine, I will save it as "AreaTriangle2" and will be saved to the Document directory. On the top of the editor window, Matlab will usually show the location of your saved file in within the directory of files (Figure 1.4).

Figure 1.4

10. Now, back to your command window. Type the name of the code file you have just saved. If you have type the name of the file correctly, you will get something as in Figure 1.5. If not, change the director or current folder.

Figure 1.5

11. Recall from step (4) about the purple-colored text. On the command window, you will know see the instruction "insert an integer for a". Type the value of side length a as the input for A then press enter. Do the same for B and C. For this example, I will insert A = 20, B = 10 and C = 15 (Figure 1.6).

Figure 1.6

12. If you have get your code correct, you should be able to get the AREA correctly. Type output and press enter. The output is the computed area of the triangle. You can always hit your calculator to check the answer (Figure 1.7). You can try with different values for A, B and C.

Figure 1.7

13. You have completed the assignment. Congratulation.

GOOD LUCK IN TRYING. Thank you for staying till the end of this article.


Article Source : bernard-greentea.blog

Follow by Email

Recent Comments

  • Mohd Nasar
    Mohd Nasarhi i have a problem in solving equation using GA i want to solve some equation using genetic algorithm. am giving u detail, for solving this equation these are the constant values.M=100;r=0.8;alpha=0.45;beta=0.75;gama=0.1;d=0.004;h=0.4;n=100;c0=1500;nn=10;x = zeros(nn,1);a = zeros(nn,1);p = zeros(nn,1);c = zeros(nn,1);lembda = zeros(nn,1);delT=1;x(1)=2;lembda(1)=150;Actually in this problem i have 6 equation and the value of t is iteraton start from 1 to n1.xxx=t+1; x(xxx)=x(t)+delT*alpha+…More »
  • Anonymous
    Anonymousi am currently working in language independent speaker recognition system for my last semester project ,all the relevent files i can give if u give me the email of the concerned matlab programmer ,i also have to make a front end in Matlab to indicate the simulation blocks of load/capture signal,Denoising using wavelet,seperated speakers as A and B,feature extraction for each speaker,classifier(HMM or GMM),add record with relevant plots in each stage.I will be grateful if u can help me out,let me…More »
  • RAJENDRA
    RAJENDRAdear sir,I am PG student doing project text extraction fro videos. I have to submit my project At this month. i worked upto text region extraction. then i am trying to divide the image into macro blocks and using svm to classify text.Pl help me to complete the project with in timep_rajendrakumar@rediffmail.com
  • RAJENDRA
    RAJENDRAdear sir,I am PG student doing project text extraction fro videos. I have to submit my project At this month. i worked upto text region extraction. then i am trying to divide the image into macro blocks and using svm to classify text.Pl help me to complete the project with in timep_rajendrakumar@rediffmail.com
  • Anonymous
    AnonymousHi, i need the matlab code for facial expression recognition using Adaboost. can you email me? jaslynloh@yahoo.comThanks
  • prashant
    prashantHello sir i need full report and matlab code for 802.11.PHY layer.please mail the code to amarprash@gmail.com
  • Saad
    SaadHI Sir i need code for speaker recognition kindly mail it to me at saadjamal47@yahoo.com
  • Anonymous
    Anonymoussir, i want a code for image watermarking in DWT.i've tried many codes found on net, but no one works satisfactorily. my email id is : taranjeet_singh71@yahoo.com
  • ashish
    ashishhello sirsend me matlab code for collision detection using Neural networkarvindwankhede111@gmail.com
  • abbott
    abbottHi: sir i need matlab code for "localization and trajectory estmation of mobile objects" using different non linear adaptive filters like EKF,UKF,Bootstrap particle filter,Regularized particle filter and SIR particle filter. Kindly help...my email is abbottoniankhan@gmail.com
  • urmila
    urmilarecently I have mailed about the videowateramrking project pls. send me code on mail amita.waghmare6@gmail.com
  • urmila
    urmilaHello Sir I am PG student and my project is on videowatermarking ,it includes embedding a binary logo in a uncoded video frames using dwt and pca.Pls help me out with this
  • Sahil B
    Sahil Bmy email id : bagewadikarsahil@gmail.comThanks.
  • Sahil B
    Sahil BPlease,I want facial expression recognition MATLAB code without protected files.
  • nikita
    nikitasnikita006@gmail.com
  • nikita
    nikitasir.i am working on "CLOUD CLASSIFICATION USING ANN"...for this purpose i need feature extraction of satellite images using DWT....please sir send me matlab codes regarding this..i am in desperate need of these codes....my email id is
  • Anonymous
    AnonymousDigital Song Identification Using Frequency Analysis i want matlab code for it..... plz mail me at aaminahassan@hotmail.com
  • Anonymous
    AnonymousThansk for the code and information sir.
  • Anonymous
    Anonymouscan u plz gime matlab code ans procedue for facial rfecogniotion using webcam...
  • Anonymous
    Anonymoussir im doing project in Optimal Power Flow by a Primal-Dual Interior Point Method. can any one post matlab coding to my mail. please help me.my mail is:priyakabila@gmail.com
  • cutie
    cutieSir, I am doing my graduation project on moving object tracking using a flying robot. could you please mail me the matlab-code for image segmentation for moving objects and the background also is moving (not stationary) Thanks and regards : mail: cutiegirl_555@hotmail.com
  • amany
    amanyhello ,,,can you plz send me a matlab code for Person authentication based on hand geometryi really need it necessarythanks alot
  • Anonymous
    Anonymoushello sirplease send me matlab code for face detection cum recognition raja_ragavi30@yahoo.co.in
  • RAJENDRA
    RAJENDRAdear sir,I am PG student doing project text extraction fro videos. I have to submit my project At this month. i worked upto text region extraction. then i am trying to divide the image into macro blocks and using svm to classify text. Pl help me to complete the project with in timep_rajendrakumar@rediffmail.com
  • lipika priyadarshini
    lipika priyadarshinihello sir,i am lipika priyadarshini .I am doing project about character recognition using biorthogonal wavelet transform.here i am using lvq algorithm.can u send me the code of LVQ algorithm.my emailid-lipika.364@gmail.com
  • krishna
    krishnaplease!!!!!any body having code for "speech emotion recognition" mail me to "krishnasatish2007@gmail.com".......thanks in advance .............
  • Unknown
    Unknownsir please send me code for image compression using discrete wavelet transform(both black and white and color image)send to lokeshvb26@gmail.com
  • Unknown
    Unknownsir please send me code for image compression using discrete wavelet transform(both black and white and color image)send to lokeshvb26@gmail.com
  • krishna
    krishnaSir, I have already developed the facial expression recognition and speech recognition..........I need only mat lab code for detecting"emotion or expression recognition from speech"........... please reply me............I dont have enough time...............
  • krishna
    krishnaSir,I am developing IEEE 2008 paper "emotion recognition from audio visual signals"Ineed code for speech emotion recognition.....my mail id is "krishnasatish2007@gmail.com"
  • Anonymous
    AnonymousSir, I am developing IEEE 2008 paper "emotion recognition from audio visual signals" Ineed code for speech emotion recognition..... my mail id is "krishnasatish2007@gmail.com"
  • Anonymous
    Anonymousbarra@die.upm.es
  • Anonymous
    AnonymousAnyone please help me with the code in cyclostationary detection in cognitive radio. Please send me the code for this to the email below t_g_dhaarani@yahoo.co.in
  • Anonymous
    AnonymousDear Sir, I am doing an ECG identification project. Would be glad if you can send me the code on detecting the QRS waveform for segmentation. Regards,lianemail: hglrocker@gmail.com
  • Anonymous
    AnonymousSir, I am doing a project on CBIR. Could you please mail me the matlab-code for Image retrieval using Color, Texture and Shape!? Thanks and regards: Avinash email: raaviavinash8072@gmail.com
  • ashok
    ashokplease send me a matlab code for effects of fft on performance of ofdm using wireless lan to my email given belowbashokece@gmail.com
  • Anonymous
    AnonymousSir, I need a Matlab code for short term hydrothermal scheduling using Genetic Algorithm(ga). I would be grateful to you if you can help me with this code. Thank You in advance..If possible kindly mail me the code to the below mail idpriyanka.pulp@gmail.com
  • Anonymous
    Anonymoussir pls send me future colour face recognition code ,doing my project sir have code send me please
  • mmfauzan
    mmfauzani am doing a project on newly implemented idea for image compression using hybrid wavelet transform, how we can apply using discrete walsh transform and DCT hybrid
  • revanesh
    revaneshsir i have an IEEE 2011 paper which is on ADAPTIVE USE OF PARALLEL CONCATENATED CODE FOR WSN and also i have the corresponding code on it which was sent to me from the author of the paper but the code is related to CODED MODULATION LIBRARY in matlab and i am entirely new to this field so i was wondering if you could help me in decoding the same ... if yes please do reply immediately cause i am on the edge with time and this must be done very soon.... THANK YOU... i am sending you the data i hav…More »
  • rek
    reksir please send me the face recognition code on thisrekha.kanwar676@gmail.com
  • chatur
    chatursir where can i get code for modimfcc
  • ssb
    ssbhello sir ,i m also doing project on text extraction from images for handheld devices, so pls help me to get the matlab code for text extraction from image..my email is ssb059@gmail.com thanks for help.
  • ssb
    ssbThis comment has been removed by the author.
  • Anonymous
    AnonymousThanks for the matlab projects list sir.
  • vatsal
    vatsalhello sirI am doing my thesis work in Image processing,can you please send me the code for my topic "Face classification by Gabor filter using Random Forest",,i have made the seperate codes for random forest and gabor filter but not able to link them properly.Plz help me.thankuvatsalvishwakarma@ymail.com
  • neha
    nehahello sir,i m doing mtech thesis in text extraction from document images.please send me matlab coding for this particular topic.my email is nehajandialaug05@gmail.com. thanks in advance for your help.
  • sagar
    sagarsir pls can any one help me i am not getting Palm print recognition
  • sagar
    sagarsir pls can any one help me i am not getting Palm print recognition
  • Divyalakshmi
    DivyalakshmiHi Sir,This topic is really interesting to read. My sister have choosen this topic only for her final year M.S project. Please help her by sending complete source code to her mail. her mail id is l_k@sify.com. She and me will be very thankfull.
  • KIRAN SA
    KIRAN SASIR,I am S.A.KIRAN,I am doing my final year project on Iris Detection.I kindly request you to provide me the complete source code.I will be happy if u give me permission to promote your website in my own blog( www.sakiran.blogspot.in)
  • sannjitha
    sannjithapls send it to susavi1991@yahoo.com
  • sannjitha
    sannjithaHiI am sanjeetha and I am doing a project on Joint Estimation of I/Q Imbalance, CFO and Channel Response for MIMO OFDM SystemsI tried lots of methods, but i get errorPls help me with codes and some reference papersThanks in advance.
  • sannjitha
    sannjithasirI am doing project on Joint Estimation of I/Q Imbalance, CFO and Channel Response for MIMO OFDM SystemsWe are trying a lot..but getting lots of erors..could u pls help us with codes for thisPls send it to susavi1991@yahoo.com
  • Anonymous
    Anonymousthanks for the code dude.i am impressed with your site having lot of matlab codes.
  • Ruwani
    RuwaniI am doing a road detection from satellite images project. I want to find the longest long axis of the minimum ellipse of each component generated using CCL. If you can please suggest a way to calculate that. Or a code for road detection from satellite images.(Road detection is not my main project. But I can move forward with out the road detection part)thanks in advance.
  • Blu
    Blusir can you send it to me the matlab code for barcode reader... thanks a lot i need it
  • sravani
    sravanii am doing b.tech final year project in which face in the image has to be compared with database of images using adaboe imageost algorithm can u pls mail me the matlab code for face detection in th
  • kumuda
    kumudaSir, I am Kumuda Mtech student of 4th semester in signal processing branch I am doing project in matlab in design and implementation of SP algorithms based on Line spectral frequency model of a sequence in that:I need to generalize this filter sirH(z)=(1-z1*z-1)(1-z2*z-1)...(1-zN*z-1)z1,z2,....zN are roots of the filterWHERE IT SHOULD FILTER X(N) INPUT AND GIVE THE OUTPUT Y(N)FIR filter can also be given in time domain for three roots as:for n=2:length(x) yn1(n)=x(n)-(z1.*x(n-1)); yn2(n)=y…More »
  • kumuda
    kumudaHello please help me in following logic:-(I have the filter H(z)=(1-z1*z-1)(1-z2*z-1)...(1-zN*z-1)Where Z1,z2,...zN are the roots of the filter...I need to implement this filter ....It may be simple or complicated but pls give an idea:_(The FIR filter I am using takes only zeros which are unimodular...I'll give a hint...the filter H(Z) can be represented in time domain as cascaded filter of indivisual filters each having roots z_n (n=1,2,3,...N) i.eh(n)= (d(n)-z1*d(n-1))output cascaded with …More »
  • suma
    sumahi,i have code for comet recognition from SOHO images in python programming language. is it possible to rewrite that code in matlab?I so please help us in this regard.thank you my email id: yadavallisuma1@gmail.com
  • suma
    sumahelloI am suma doing project related to image processing in matlab.Our aim of the project is to identify comets from images SOHO C2 images.So i request you to please send the code. I am very thankful if you do so.tnank youmy email id is yadavallisuma1@gmail.com
  • lawr3nce
    lawr3ncesir please send me matlab code for project barcode reader.. tnx
  • jaya
    jayasir please send me amatlab code for project"neural network synthesis beamforming model for adaptive antenna arrays"
  • princess
    princessSir I need a listing program for underwater ray theory modelling, where I can determine some environmental properties such as density, salinity, depth, etc.. please help me..
  • varun
    varundear sir, am an Mtech student in BMSCE. am doing project on random forest. please can you help me by providing the MATLAB code for random forest for fault tolerance. and also the matlab code by loading 3 training data sets ie iris reorder, yeast and vehicle in random forest for fault tolerance matlab code and classify through the phylogenetic tree.. it will be a great if you help me on this..thank you sir
  • Bharadwaj
    BharadwajDear friend, This is bharadwaj, owner of this site. I made this website only for providing matlab codes to the world as a free service, No need to pay for the codes.I will send you the code for this project exactly in 13 days as i am out of country right now.I appreciate if you share your papers,projects and presentations to the world and publish on your name only not mine. you can send your database to bharadwaj@matlabcodes.comRegards,Bharadwaj
  • toinx
    toinxhello sir,need help in doing my mini project:required to design an LPC coder and decoder and Read the speech file provided in the course website, i.e. speech.wav (8 kHz samplingrate). Then required to do frame-by-frame processing. Apply pre-emphasis filter,Hƒvzƒw ƒ­ 1ƒ{ 0.95zƒ{1 to the speech signal using frame-by-frame processing. Use a framesize of 20 ms.Then have to answer this question : What is the compression rate for 20ms of speech signal if you are using the number ofLPC coefficients, M …More »
  • a
    ai need this code pls revert back i m ready to pay amount what i need ; robot will capture the image identify the shape and rotate motor using seria: l portemail id : anjumali@rediffmail.com
  • Rohi Sarmah
    Rohi Sarmahhello siri am rohit, i need project ideas,guidance,codes for the project "ANALYSIS AND PLANNING MICROWAVE LINK TO ESTABLISHED EFFICIENT WIRELESS COMMUNICATIONS" .i will be very happy for your guidance .my id is "rohitsarmah32@gmail.com"with regards,rohit
  • sakshi
    sakshidear sirthis is sakshi. i m doing mi thesis on multimodal biometrics. i m nt getting any idea how to calculate FAR & FRR in hand geometry & face verificationplz help me....sakshi_kapuria1203@yahoo.co.in
  • sudhik jain
    sudhik jainHello Sir,Mine is also the same project and i'm trying to develop in matlab. I'm not getting done since matlab is new to me, please send me your code, i'll try to analyze it.My email id is sudhik.sk@gmail.comThanks in advance
  • rajalakshmi
    rajalakshmiDear Sir,This is Raji.I am doing my PG project based on hand vein authentication.Kindly help me by sending the code for delaunay triangulation in image processing.My mail id is srmraji@gmail.com
  • rajalakshmi
    rajalakshmiDear Sir, This is Raji.I am doing my PG project based on hand vein authentication.Kindly help me by sending the code for delaunay triangulation in image processing.My mail id is srmraji@gmail.com
  • jayasree
    jayasreehi,iam jayasree. could u mail me MAT LAB coding for Voltage Stability index of a power system network (say IEEE 30 bus system)
  • vip
    vipim doing a project involving object extraction from infrared images.is it possible in matlab?
  • srinivas
    srinivassir i want to do the following ieee paper topic as my project can i have some guidance how to startSPECTRAL SUBTRACTION METHOD FOR NOISE SUPPRESSIONIN AUTOMATIC SPEECH RECOGNITIONthanking you
  • anitha
    anithaHi we are doing a project in steganography using matrix embedding and yass algorithm... can you please help us with the matlab coding for our project ??? pls reply asap...
  • suryateja
    suryatejasir please send me a matlab code for project "warped discrete cosine transform based noisy speech enhancement
  • suryateja
    suryatejasir please send me a matlab code for project "warped discrete cosine transform based noisy speech enhancement
  • Arooj
    AroojI am doing my fyp which is speed estimation of vehicles through camera, kindly give me any code for speed estimation........
  • T-X  and  Dranzer
    T-X and Dranzeri sir after a longtime i found yoursite through google search plz send me the ocr project code my email id is mahammadgouse@in.com
  • pawan19
    pawan19sir i need matlab code for interpolation(using 2d fft...pls help me out
  • PGR
    PGRI am not expected a mail from u, i think 5 days back requested code but got a mail from u today. Great really i am hopeless for my project..u given me lot of data and codes.Next two days i completing my project which is similar to your project.WoW great helping site. I refer my friends and juniors. thanks for your code.. Now i am sending you my matlab data , codes and whatever i have to your mail... Thanks for your help.Regadrs, Gisley Australia
  • zawaiter
    zawaiterhi sir, i need to write a code for AUTOMATIC vessel segmentation from a brain image MRA(ANGIOGRAM).MAY BE USING TECHNIQUES LIKE FRANGI"S VESSELNESS MEASURE AND FLUX MAXIMIZATION FLUE ALGORITHEMS,I WISH YOU CAN HELP ME,PLZ I AM WAITING YOUR CODE.MAIL ME.
  • S
    Shi i am mani. I am doing final year project. For that i have to classify images according to their low-level features such as color, texture and shape. Kindly send me the coding for extracting color, texture and shape. I need to know how to merge these features in a single vector. Also, need coding to classify images according to this vector by SVM classifier. Send me any codings related to this as soon as possible,thank you,my e-mail id: manimcaau@gmail.com manimcaau@yahoo.com
  • dogsoldier
    dogsoldierHi, I am Kamil and I work on automated image classification project in matlab. Can you send me your code please? My mail is cneuha3@gmail.com. Thank you very much.
  • sumi
    sumihello siri am sumithra and am doing my final year project in the tiltle "multi user quing analysis of wireless voip services" can u pls help me with the coding part.my mail id is sumithra.31g@gmail.comwe hav to complete the project soon,so hope u'll help
  • farzaneh
    farzanehhii want this project code. how can I get it? plz help me
  • kumuda
    kumudaHi I am trying to implement an FIR filter OF type POLE zero GAIN FORM i.e:H(z)=(1-z1*z^-1)(1-z2*z^-1)....(1-zN*z^-1); The pole zero gain model is there but I need to filter the data x with H(z) which is not available in matlab. since filter function is incompatible with non dfilt objects. Pls guide me to have an automated filter of this type which is programmed in matlab source code Like other Direct form 1,2 structures.
  • rutu
    rutuhi...m doing a project in matlab : similarity based image classificationcan sum1 plz help me with the code for feature extraction on images...
  • karacoma
    karacomaCan anyone help me? i need program code for music note recognition or music note tuner ... really need help on this where the matlab programme code is able to read the note that i play on for example guitar or piano or violin?this is very important for me .. i hope you will reply soon
  • PGR
    PGRhey man , i am gisley from australia...doing my school project in OFDM domain in matlab software.could you please send me codings of "A Low Complexity Algorithm for Proportional Resource Allocation in OFDMA Systems" to my mailgisley.brigly.au@gmail.com
  • Abhinandan S R
    Abhinandan S Rplease send me matlab code locating fault on transmission lines
  • vijay
    vijayI havent recieved any reply yet, can you please send me a sample code for the deformable template matching.email: vijays2050@gmail.com
  • preethi
    preethiplease mail me at preetiyg@gmail.com
  • preethi
    preethihi sir,as i had mentioned above, i need to design kaiser window. i have the raw ECG waveform(with noise), and i need to obtain the specifications( passband and stop band ripple,etc) of the window from that. how do i do so?
  • faizan
    faizanso you can email me atfaizan_464@hotmail.com
  • preethi
    preethihi i am doing a project on noise removal of ECG signals. the noises mainly being baseline wander, motion artifact and poweline interference. I need to use kaiser window to begin with. pl help
  • bharadwaj
    bharadwajDear friend, Thanks for your comment, i mail u but it is failed, u have to Please check the plugins..otherwise it will not work.

Popular Matlab Topics

Share your knowledge - help others

Crazy over Matlab Projects ? - Join Now - Follow Me

Sites U Missed to Visit ?

Give Support

Give Support
Encourage me through Comments and by Followers
Related Posts Plugin for WordPress, Blogger...

Special Search For Matlab Projects

MATLAB PROJECTS

counter

Sparkline 213,772
Bharadwaj. Powered by Blogger.

3 comments:

  1. please send the matlab code for Joint Estimation of I/Q Imbalance, CFO and
    Channel Response for MIMO OFDM Systems to gnaneswar.24@gmail.com

    ReplyDelete
  2. Hi prasad,
    Im trying to simulate a Broadband over Power Line model in SIMULINK.
    Im having some issues to do the Echo model and merge an impulsive noise along with the ADD blockset in the simulink library.
    Im totally lost and i have no idea how to make the signal dimension to be the same as the input signal dimension..
    If you have any tips or advice... it will be most welcomed.
    You may contact me on nikool.korp@gmail.com.
    i can send you my model and will be willing to share it on your blog after my submission.

    Thanks in advance.
    Hope to hear from you soon.

    ReplyDelete
  3. hello,
    sir I need matlab codes for palm print recognition system.I have commented already regarding this but didnt get any response regarding this.I am running out of time for submission.please do respond to me.
    regards

    ReplyDelete